Kenwood KPG-111D FPU (v4.8) Programming Software Issues
wqnd300 saidTrying to program a Kenwood NX-210-k2 and get an error saying Check model name and market code. I then checked the model information and it shows nothing i can select for the 210 so im guessing i have the wrong software?
If you have KPG-111D:
With the radio on and the programming cable connected, try clicking 'Transceiver Information' under the Read/Write menu, it should give you the firmware version installed in that radio - if the firmware is ~v4.7 or newer you will need to upgrade the software to the latest version available (5.21 from memory) in order to read/write to that radio. Alternatively, you could hold side button 1 when powering on the radio, this will display the currently installed firmware version.
Hopefully this helps.