Skip navigation
Banner

3 Radios, Bad luck,good luck,bad luck

Post

VX 180v

  After such great luck with the VX 231, I got a VX 180. Bought the proper cable and HamFiles supplied the CE 44 software. The 180 will not program yet. The CE 44 SW spreadsheet shows a comport number that I need to change. But when placing the cursor on the Comport box nothing happens to indicate the box is working. How do I get the ComPort box to work ? And what is the purpose of having Disc 1, Disc 2, and Disc 3 ?

  Thanks in advance for any help, Sarge
Back to the top

Post

Are you using a USB cable? If so what port number is showing in "Device  Manager" That's the port number you need. Also the cable from the 231 should work on the VX180.. Not sure what you mean by disk1 disk2 disk3..
Back to the top

Post

file-configure
is where you set com port
it will popup problem with com port on start up if cable is not connected to computer.
also may be driver problem if using USB.
 

location USA
Back to the top
1 guest and 0 members have just viewed this.