Skip navigation
Banner: If you have checked the All Downloads List and the Back Catalogue and still cant find what you want, put in a request in the Wanted Forum.

BF-R5(VS-52)

Post

program software for BF-R5(VS-52)

3 month ago I bought one Baofeng radio communication from an online seller.  type BF R5. As the seller said, the frequencies could modify using software Baofeng BF888s ( which I already have).
Once I tried to modified, they don't match each other.  Since At the end of the modification process the writting process could never be completed.
Futhermore I went to Baofeng website, then I knew, this device has another name Baofeng VS 52.
Since then, I write an email to the manufacturer, with no reply until now. At the other way, I also look for the program software anywhere, but fortunately the result still not good.
If there someone have the program software for this device, and would gladly share for me, I would be so grateful. Thank you in advance.

 
Back to the top

Post

Did you try chirp.or check if chirp support that particular model .does the radio look like this #



or this#

Last edit: by tech


R.G TWO-WAY RADIO Electronic & consultant
Back to the top

Post


hi tech, thanks for your reply.
yes, I already test with all baofeng software in CHIRP, still didn't work but with various error messages. about the pictures attached…  the first one is the mini series of it. it looks like the second one, but I'm not so sure, because the pic is blurred…
Back to the top

Post

I will check on it

R.G TWO-WAY RADIO Electronic & consultant
Back to the top

Post

Hi Tech,
could this issue related to the programming cable that I  have….?
Back to the top

Post

Can you show me pic of the cable anything is possible but i dont think so .but i know the cable that why i said so.

R.G TWO-WAY RADIO Electronic & consultant
Back to the top

Post

Hi tech,

I'm new on this site, the pictures already captured, but I cannot attach them on this thread communication (sorry, another issue indeed). Should I make a new link for the pictures to upload in the mail…?
I just seen the picture that you attached on previous mail, the pic 2.  Yes it is the same with mine.
Back to the top

Post

It is very easy.when you are doing a post look at the bottom click on the arroe below you will see picture attachment

R.G TWO-WAY RADIO Electronic & consultant
Back to the top

Post

hi.
try "playing" around with the adapters baud rate.
properties-port settings
standard is 9600.  best on most radios is 57000.
i read about, when studying the procedure of updating firmware on baofeng dmr radio and so i tryed and it worked.
…and be sure, having latest driver installed,
prolific with W7 is 3.8.18.0
sometimes it makes sense, restarting the soft, before you write the radio with changes.
good luck  :thumbs:an other idea:
the zastone mini 6 looks like your radio and at its manufacturer homepage.com youŽll find
MINI6 software
for free on download-page 2.

Last edit: by pete68

Back to the top
1 guest and 0 members have just viewed this.