Skip navigation
Banner: Programming or technical problem? Click to Ask the Experts.

programming IC400PRO by icom

Post

I have downloaded the software and i want to add the new narrow band channels plus run a little more wattage to do it do i need to have the radio hooked up or can i write the programme then up load at a later date thanks for your help

Myles
Back to the top

Post

Gday Myles

You'll have to have your 400pro hooked up to your PC and powered up to programme channels and make adjustments, I have the narrow band 80ch data file but i'm having trouble up loading it. To up the TX power in the add Freq screen you should see the RF pwr column if you double click on it L1,L2 and H will come up. Click on H to give you the High power.
However be aware that 25w can only be used on Registered Freq an 5W is the max power on the 80ch uhf CB. Hope this helps!
Back to the top
1 guest and 0 members have just viewed this.