Barrett 2050 programming software

Post

Posted
Rating:
#15640 (In Topic #11488)
Avatar
Member
Hallo to everyone,

      I'm looking for the Barrett 2000 series programming software, to be used with a Barrett 2050 HF transceiver.

If someone can help me it will be really appreciated.

Tnx !

73 de IN3FTD
Francesco
Online now: No Back to the top

Post

Posted
Rating:
#147644
Avatar
Member
  I'm looking for the Barrett 2000 series programming software, to be used with a Barrett 2050 HF transceiver.
It appears this radio is so old it's not available anymore.
Thanks,
   Watts
Online now: No Back to the top

Post

Posted
Rating:
#151139
Avatar
Member
I dont have the software but you can programme the radio from the front panel -To program your radio from the front panel—
 hold down the clear key until it asks for a pin.

Enter 2468 and then it is unlocked.

Enter the channel you want to program

Press the program button and away you go

Online now: No Back to the top

Post

Posted
Rating:
#151155
Avatar
Member
Many thanks for your info.

I'll keep the ulocking code.

73, Francesco
Online now: No Back to the top

Post

Posted
Rating:
#161363
Avatar
Donor
I recently acquired a 2050 and wondered if the firmware were out-of-date as it seemed to be new-old-stock. I created an account on the Barrett tech support site and submitted a query.

They provided me with a firmware update utility and the latest version of the programming software to use once the radio had been updated. They were super helpful and responded very fast to queries.
Online now: No Back to the top

Post

Posted
Rating:
Item has a rating of 5 (Liked by PUWAGA)
#163569
Member
HI Francesco
The file is available but too large to email.
I have sent you an email earlier.
Contact me on that please
73
Brian

Last edit: by VK5KBR

Online now: No Back to the top

Post

Posted
Rating:
#171085
Avatar
Member
Hi VK5KBR (Brian), I have sent you an email to the address supplied here.
Online now: No Back to the top

Post

Posted
Rating:
#305908
Avatar
Member
Hi All,

I am looking for PIN OUT / Drawing for the Programming cable for the BARRETT 2050 .
Just got hold of one and would like to program the radio with most of the Ham freq,to much of a hassel to try and program it from the radio's face.

If someone can pls help with a drawing or pin lay out pls.

Thanks,
Mark  ZS6JMF.O_o
Online now: No Back to the top
1 guest and 0 members have just viewed this.