Skip navigation
Banner: Programming or technical problem? Click to Ask the Experts.

KENWOOD Tk-390

Post

Looking for Firmware

I have the older model TK-390 and looking to upgrade the firmware. Any help would be appreciated.
Back to the top

Post

The TK-390 has a few different firmware options depending on the serial number.  Version 2.25 for sn B14~ and Version 11 for sn 111xxxxx ~ 212xxxxx (checksum 608F).

To put the TK-390 into firmware programming mode hold down the [Side 2] key and [PTT], turn the radio power on, and release [Side 2] key first.
Back to the top

Post

I am aware of the different versions and how to upgrade but I don't have access to the actual firmware to upgrade to. Thanks for the reply.
Back to the top

Post

for us to be able to point you in the right direction to the correct firmware we will need to know the first 3 digits of the serial number. dont want you sent to the wrong firmware then bricking your radio  :o

boldly going no where
Back to the top

Post


I have 10 of these things. Majority serial numbers are 006 with a few 007. Thanks.
Back to the top

Post

sent you a pm

boldly going no where
Back to the top

Post

Pigsdofly you should upload and asked for validation.so others can benefit too. not to send pm.

R.G TWO-WAY RADIO Electronic & consultant
Back to the top

Post

upladed

boldly going no where
Back to the top
1 guest and 0 members have just viewed this.