Skip navigation
Banner: Programming or technical problem? Click to Ask the Experts.

Looking for programming software

Post

Icom IC-F29SR2

Hi I'm looking for a programming software that works with this type of radio it's an Icom IC-F29SR2.
I've two USB cable OPC-478UC from ICOM and a 6 in 1 usb cable with the Prolific driver.
I've also downloaded these softwares CS-F29R revision 1.00 and 1.10 but with both off them it gives me an error message when I'm trying to read or write to the radio.
 
Back to the top

Post

are your drivers up to date. i will check to see if there is later version software.and do know the difference between ftdi and proflic cable.:thumbs:

Last edit: by tech


R.G TWO-WAY RADIO Electronic & consultant
Back to the top

Post

Hi,

It wasn't a cable or driver issue. For this radio we have to use the CS-F29SR2 programming software.

BR
Back to the top

Post

from what i am seeing .and made some check  not seeing any later version.only hope some one can shed some light on this.:thumbs:

R.G TWO-WAY RADIO Electronic & consultant
Back to the top

Post

Motorola bpr40 mag one, I cloned two of three radio's, think the third radio software might be out of date, but I'm not sure that's the issue . at the end of the step by pressing the slave middle button and the master radio,, both lights turn red and then a minute later it hums. I went though all three radio's a couple of time also and the last two radio's and they  done the same . no progress .. could it be out of date ? all thre modle numbers are AA_______# North America
any ideals.
thanks
Back to the top

Post

How long since you have clone them .maybe it can be the version software arec you are using .and where did you download the software from.what kind of cable you are using.the issue you are have it can be one out of a couple of things .do checked keep posted

Last edit: by tech


R.G TWO-WAY RADIO Electronic & consultant
Back to the top

Post

Hi ,Well I never program with software before . I just cloned two and these are acting up, yes I gotten them from eBay . now I also gotten another total 4 now. I wanted to be prepare for group morel hunting .. anyways figure to try and save a little and learn a little more of radioing . Thought the radio's must be out of date of each other. So I'm looking at amazon for cables
for the programming .I download the software on my laptop. seem to be ok with that . Didn't open it just looked at the properties,, just wondering if there is a wizard in there to help install. any Helpful tips ,it would be nice .
thanks   
Back to the top

Post

no problem we here to help ok.:thumbs: 

Last edit: by tech


R.G TWO-WAY RADIO Electronic & consultant
Back to the top
1 guest and 0 members have just viewed this.