Motorola Centracom Series II RVN4029K and Gold Elite Software Needed
SERIES2 RSS, Elite ADM, CDM, and Op Software Request
I'm looking for several pieces of Motorola Centracom software in order to complete a project. Software is the hangup at this point.
The first piece I'm after is the Centracom Series II RSS. I believe this is titled SERIES2 and that the part number is RVN4029 or RVN4029K (probably a revision number).
That software is for the older Centracom Classic Buttons and LEDs consoles.
I'm also looking for software for the Centracom Gold Elite consoles, which were PC based. For this I need the Console Database Manager (CDM), the Alias Database Manager (ADM), and the actual console software itself that ran at the console positions.
I greatly appreciate any help anyone can offer.
I'm still learning more about these consoles as I go. I know older hardware required a prom programmer and that newer hardware could be programmed via software and an RS232 card. From what I can tell a Buttons and LEDs setup can be programmed via CDM so long as it is using a COIM and not an older OMI. I wasn't sure if the older DOS software would program a COIM based console or if that would only work with the older hardware and a prom burner.
Just wondering if you had a chance to dig anything up.