Skip navigation
Banner: Programming or technical problem? Click to Ask the Experts.

PPS2, Programming software for Marantz Standard Hx-290

Post

I'm on the hunt for some very old marantz standard programming software for the Hx-290. I have several of these radios and I would like to program them. I already checked if there was anything for these on the site and found nothing. If anyone has the PPS-290 software or information regarding the programming methods used, I would be grateful.

I have the shop manual but not the separate programming manual: part number : 408B851040.

Regards,

Small edit: The software in question is PPS-290 not PPS2. 

Last edit: by ForumFrog

Back to the top

Post

I have uploaded and asked for validation.

Last edit: by Poptarrrrrt

Back to the top

Post

Poptarrrrrt said

I have uploaded and asked for validation.

Thanks very much! I am curious if you also know the upper limit of compatibility for the software? The manual says DOS-6.2 and up are recommended, but I can't find anything that specifies where that support stops.
Back to the top
1 guest and 0 members have just viewed this.