Skip navigation
Banner: If you have checked the All Downloads List and the Back Catalogue and still cant find what you want, put in a request in the Wanted Forum.

Simoco SRM-9000 Series RS-232 Programming Cable

Post

Hello if just gout myself  a srm9000 uw unit and having trouble finding the wiring diagram for the Simoco SRM-9000 Series RS-232 Programming Cable . It needs to tell me what colour wire connects to the network plug
Back to the top

Post

The Front End-cap has a 8 pin RJ45 Microphone / Control Unit / Programming connector:
Tx-Data (0,5V)                        pin 1
Rx-Data (0,5V)                       pin 2
On/Off input                          pin 3
Mic Ground                           pin 4
+13.8V (Switched OP)             pin 5
Handset Audio OP (Flat)          pin 6
GROUND                               pin 7                                      
Mic Audio IP (Pre-emp or Flat) pin 8
viewed front of radio pin 1 is to the left locking tab to the top

location USA
Back to the top

Post

35rem said

The Front End-cap has a 8 pin RJ45 Microphone / Control Unit / Programming connector:
Tx-Data (0,5V)                        pin 1
Rx-Data (0,5V)                       pin 2
On/Off input                          pin 3
Mic Ground                           pin 4
+13.8V (Switched OP)             pin 5
Handset Audio OP (Flat)          pin 6
GROUND                               pin 7                                      
Mic Audio IP (Pre-emp or Flat) pin 8
viewed front of radio pin 1 is to the left locking tab to the top

What colour are the wires for the for the prong plugs
Back to the top

Post

It's the same as the PRM80 series lead.  Plenty of circuits on the web.
Back to the top

Post

color does not matter
Tx-Data to pin 1
Rx-Data to pin 2
ground to  pin 7
is what matters

location USA
Back to the top
1 guest and 0 members have just viewed this.