Skip navigation

Wanted: M/A-Com Harris P7200 series all models

Post

Trunking Software Request

I have a few HARRIS P7200 Portable Radios and need to program trunking.
Seeking any and all software for this radio. Looking to work out a bypass to the system key feature of the newest RPMs.
I already have R17A05 and R18B02.

Also seeking the Feature codes and ESNs of all the radios.
Feature Encryption Data: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ESN: 00 00 00 00 00 00
If I can get a large enough sample it may be possible to create a Generator to upgrade radios.
And if I am not smart enough to get it done we could always pitch in for a Bitcoin and pay someone from the DarkNet to do it.
Thanks

Last edit: by syntaxnero

Back to the top

Post

Read this: http://www.n0mb.net/?p=11 (Downgrading from RPM to Programmer | NØMB Tech Blog)  This details what you need to do.

73
Back to the top

Post

JA-MOTO said

Read this: http://www.n0mb.net/?p=11 (Downgrading from RPM to Programmer | NØMB Tech Blog)  This details what you need to do.

Thank you.

I would still like to try and crack the RPM and upgrade features at some point.

On the page you provided, near the bottom it speaks of .DSP files. Do you know of a repo I can download them from?
Back to the top

Post

No.

Only other place I can recommend is the GE and GE-Orion yahoo groups.  check them out.

I'm not really a GE/Ericsson/Macom/Harris guy and don't know a whole lot about the newer radios (newer being anything newer than an M-RK)

73
Back to the top

Post

JA-MOTO said

Read this: http://www.n0mb.net/?p=11 (Downgrading from RPM to Programmer | NØMB Tech Blog)  This details what you need to do.

After some research, I will not be able to use the info at http://www.n0mb.net/?p=11 (Downgrading from RPM to Programmer | NØMB Tech Blog) for my radios, the downgrade only works for P7100.
ProGrammer will not work on the P7200 Radios.

So now I have to find a copy of RPM or RPM2.

Anyone wanna hook me up?
I have a RKN4106A cable I can trade you for.
Back to the top
1 guest and 0 members have just viewed this.