Icom CS-F33G CPS - RSS Programming Software
CPS-RSS Version 2.3
Additional informationThis software is designed to provide cloning and programming access to the following radios:
- VHF/UHF Transceivers
By default you can hold P3 and the Up keys while powering on to see which firmware revision your radio is running.
**You must use a OPC-478 compatible Icom programming cable. This cable has a circuit that puts the radio into programming mode when plugged in. If the CS-F33G software reports that it can not connect on the right COM, this is likely your issue.
- Extract ZIP to any folder temporary eg. c:\IcomSetup
- Launch setup.exe and use the Product ID number found in the txt file.
- Complete installation to your desired path.