Skip navigation
Banner: Jump directly to the Hamfiles Site News Forum

MT2000 Hand Held RSS (R01.13.00) Programming Software

Version R06.08.00 for DOS
 

Additional information

Allows programming into the ham bands.

LZ2NJG says:

For this DOS application it is necessary to create 2 mounts if you are using DOSBox, here's how:

In this example I will use d:\RSS as the unzip folder and d:\RSS\APP as the application folder
  1. Create the above folders using Windows.
  2. Unzip the package into \RSS
  3. Start DOSBox
  4. From the command prompt type> mount a d:\rss
  5. From the command prompt type> mount r d:\rss\app
  6. Now type a:
  7. At the a:\> prompt type Install
  8. When the S/W asks where to install there will be a drive R: DRIVE in the list, choose that.
The install is very slow but it will finish. Instructions on how to run the S/W will then be on the screen.

If you wish to use the install again, run DOSBox and just mount the R: DRIVE as above and change to the \MRSS\MTSX folder to run MTSX eg.
  1. Start DOSBox
  2. From the command prompt type> mount r d:\rss\app
  3. r:
  4. cd\MRSS\MTSX
  5. mtsx
Each DOSBox line should be terminated by pressing the ENTER key.
 
Notes:
Users have reported that this download is compatible with the indicated Operating Systems but an X does not necessarily mean it isn't. If you have successfully used this D/L with an otherwise un-confirmed O/S please leave a comment.

If you find an error in this or any other listing please let us know via the comment section for the appropriate download. Thank you.

Images